RGB LED Strip Light Controller Driver With IR Remote Controller, 12V 6A Driver with 2 Outputs, 44 Key Controller

Specifications:

This led strip Controller can connector 2 rolls of LED strip.
Controller Output: DC 12V, 2A/Channel, 2-Port
Max Load Current: 3*2A
Working Temperature: -20°C~60°C
Control Range: 10cm - 500cm RGB LED Strips
Remote Control Distance：5M-8M (Recommended to use remote controller in the absence of obstacles)

Examples for Applications:

Point-source light

Flexible strip light

Wall washer light

Glass curtain wall light

If the controller displays the wrong colors, for example red button shows green, it doesn't mean the controller is defective. Resetting the R/G/B order again following below steps will resolve the issue;

1.Turn off the light strip.

2. Press "FADE7" button, the light strip will flash once.

3. Press R.G.B keys once to adjust the line sequence and turn on the light, the buttons control the right color.

4. If not, repeat the above steps until the button makes the color right.